Bosch GCM 10 MX Original Instructions Manual page 13

The power tool is designed with sufficient capacity for saw-
ing hardwood, softwood, chipboard and fibreboard, as well
as aluminium and plastic.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Protective guard
(2) Lever for releasing the tool arm
(3) Handle
On/off switch
(4)
(5) Retracting blade guard
(6) Fence
(7) Saw table
(8) Holes for screw clamp
(9) Insert plate
(10) Locking knob for all mitre angles
(11) Mitre presetting lever
(12) Angle indicator for mitre angles
(13) Scale for mitre angles
(14) Mounting holes
(15) Recessed handles
(16) Drill holes for extension bars
(17) Adjustable fence
(18) Screw clamp
(19) Dust bag
(20) Chip deflector
(21) Wing bolt for fixing the adjustable fence
(22) Hex key (6 mm)/cross-headed screwdriver
(23) Stop screw for 45° bevel angle
(24) Tilt protector
(25) Chip ejector
(26) Clamping handle for all bevel angles
(27) Transport safety lock
(28) Transport handle
(29) Spindle lock
(30) Depth stop adjusting screw
Angle indicator for bevel angles
(31)
(32) Scale for bevel angles
(33) Stop screw for 0° bevel angle
(34) Holes for tilt protector
(35) "Tilt protector" fastening set
(36) Extension bar
(37) Fastening screw for extension bar
(38) Cross-head screw (retracting blade guard attach-
ment)
(39) Hex socket screw for mounting the saw blade
(40) Clamping flange
Bosch Power Tools
(41) Saw blade
(42) Inner clamping flange
(43) Wing bolt for adjusting the height of the threaded
rod
(44) Threaded rod
(45) Detents for standard mitre angles
(46) Screws for insert plate
(47) Hex socket screw for fence
(48) Screw for bevel angle indicator
Technical Data
Mitre saw
Article number
Rated power input
No-load speed
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
Permitted workpiece dimensions (maximum/minimum): (see "Per-
missible workpiece dimensions", page 17)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Dimensions of suitable saw blades
Saw blade diameter
Base blade thickness
Hole diameter
Noise Information
Noise emission values determined according to EN
62841-3-9.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 92 dB(A); sound power level
105 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
English | 13
GCM 10 MX
3 601 M29 0..
W 1700
-1
min 4800
kg 16.8
/ II
mm 254
mm 1.8−2.8
mm 25.4
1 609 92A 4YM | (15.05.2019)