Connecting - Sony UDA-1 How To Use Manual

: Walkman that supports High-Resolution Audio
: WM-PORT (22 pin)
: High-Resolution Audio USB Adaptor WM-PORT Cable (WMC-NWH10, not supplied)
: USB cable (supplied)
: (USB) port of the USB DAC AMPLIFIER
[18] How to Use
Connecting other playback equipment
You can connect other playback equipment such as the Super Audio CD player to the USB DAC
AMPLIFIER and enjoy playback from that equipment through the speakers or headphones of the USB
DAC AMPLIFIER.
Note
Make sure that the AC power cord (mains lead) of the USB DAC AMPLIFIER is unplugged when
connecting any other cord.
Only the LPCM 2ch audio format can be played when the signal is input through the COAXIAL or
OPTICAL jack. Playing other formats may produce noise or even damage the speakers or
headphones if played at a high volume. When a signal of a format not supported is input, the
COAXIAL or OPTICAL input indicator lamp flashes.
Connect another audio player to the COAXIAL jack, OPTICAL jack or LINE IN jacks on the rear panel of
the USB DAC AMPLIFIER.
Preparations and connections Connections