Sony UDA-1 How To Use Manual page 20

1. (ON/STANDBY) button
Turns the USB DAC AMPLIFIER on and off.
2. Power lamp
When the USB DAC AMPLIFIER is turned on, this lamp lights up in green.
The lamp turns off when the USB DAC AMPLIFIER is in standby mode.
3. Input indicator lamps
The lamp of the input source selected lights up.
4. INPUT SELECTOR button
Press this button repeatedly to select an input source.
5. MUTING lamp
Lights up in amber when the muting function is active.
6. DSEE lamp
Lights up in blue when the DSEE function is active during playback.
7. PHONES jack
Connect headphones here.
8. (USB) port (Type A jack)
Connect a smartphone such as an Android device or an iPhone, etc., here using a USB cable (not
supplied).
You can play music on mobile devices supported by the USB DAC AMPLIFIER (sampling
frequency up to 48 kHz).
You can charge mobile devices.
PC connection is not supported.
USB flash drive connection is not supported.
To open the cover, pull it down.
9. PCM sampling frequency indicator lamp
The appropriate lamp for the frequency of the PCM High-Resolution Audio file being played back
lights up in white.
10. DSD lamp
Lights up in white when DSD audio is played back.
11. VOLUME +/– control
Adjusts the volume.
12. Remote sensor