Standby - Sony UDA-1 How To Use Manual

2. Replace the lithium battery CR2025 with a new one, with the + side facing up.
3. Place the battery case back in position.
Note
Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately consult a doctor.
[13] How to Use
Standby mode
If you switch the AUTO STANDBY switch on the rear panel of the USB DAC AMPLIFIER to "ON, " when
you are not using the USB DAC AMPLIFIER or there is no digital signal input to the USB DAC
AMPLIFIER for 20 minutes, the unit is automatically turned off and enters standby mode to reduce the
power consumption.
Before the USB DAC AMPLIFIER switches to standby mode, the
then the lamp turns off.
Note
If a very short audio signal of only a few seconds duration is input, the sound may not be detected as
an audio input, and the USB DAC AMPLIFIER may switch to standby mode.
Preparations and connections Preparations
lamp flashes for 1 minute, and