Table of Contents
Advertisement
Battery Pack - Installation & Removal
Battery Pack Installation:
• Rotate trigger to the SAFE mode.
• Align the battery pack contacts on the top of the
battery pack with the battery receptacle on the
handpiece.
• Slide a battery pack into the battery receptacle until
the battery pack latch snaps indicating the battery
pack is secure.
• Rotate trigger to the RUN mode.
• Test the handpiece and battery pack by depressing
the trigger.
• Rotate trigger to the SAFE mode when not in
operation.
Battery Pack Removal:
• Rotate trigger to the SAFE mode.
• Press down on the battery pack latch and slide
battery pack out of the handpiece.
• Always remove battery pack when not in use.
Battery Pack
Contacts
Battery Pack
Latch
Battery
Receptacle
Battery Pack
Latch
9
Advertisement
Table of Contents
