Introduction; Intended Use; Warnings - BRASSELER USA BSP MAX II Instructions For Use Manual

Introduction

Thank you for choosing Brasseler USA® Surgical Power & Accessories as supplier of your large bone power system.
The information and procedures described in this manual are intended to assist medical professionals in
the safe and effective use, care, cleaning, sterilization and long-term maintenance of BSPMAX™ II Large
Bone Power System.

Intended Use

The BSPMAX™ II handpieces are designed for surgical applications in: Orthopaedics, Total Joint Reconstruction,
Osteotomies, Trauma and Thoracic.
The BSPMAX™ II Sagittal/Oscillator Saw, PM-X12-700, is designed for cutting bone and bone related tissue
most common to large bone orthopaedic surgical procedures.

Warnings

• Only trained and experienced medical professionals
should use this equipment. Failure to comply with
the BSPMAX™ II Instructions for Use may result in
patient and/or medical staff injury.
• Use of eye protection is required while operating
equipment.
• To prevent accidental activation of the handpiece,
the trigger should always be in the SAFE mode
when attachment, battery pack and cutting
accessory (saw blade) are being installed or
removed.
4
• To ensure safety and optimum performance, use
Brasseler USA® Surgical Power & Accessories
cutting accessories (drills, wires and pins).
• Before each use, test the equipment and inspect
each device (handpiece and accessory) for damage.
Do not use any device if damage or malfunctioning is
apparent. Return device for service.
• Continually check handpiece for excessive heat. If
overheating is noticed, discontinue use and return
device for service.