Hardware Contents; Preparation - Dyna-Glo DGVS390BC Manual

HARDWARE CONTENTS

A
M4 x 15 mm
Screw
Qty. 9

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
For Ease of Assembly:
• To avoid losing any small components or hardware, assemble your product on a hard level
surface that does not have cracks or openings.
• Clear an area large enough to lay out all components and hardware.
• When applicable, tighten all hardware connections by hand first. Once the step is completed, go
back and fully tighten all hardware.
• Follow all steps in order to properly assemble your product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (Not Included): No. 2 Phillips Head Screwdriver
B
M4 Wingnut
M5 x 12 mm
Shoulder Screw
Qty. 9
C
M5 Wingnut
Qty. 4
8
D
M5 x 12 mm
Qty. 18
Qty. 12
E
Screw