Advertisement
Your digital playground
Important Safety Check Instructions
You must read all instructions carefully before you start and comply with the procedures set out
below. Failure to comply precisely with these instructions could lead to personal injury and / or may
damage your notebook.
•
You must be 18 or older to install components.
You have elected to fi x the component yourself
and, therefore, represent you have a basic level
of computer knowledge and skill required for
fi tting.
•
Only perform the Easy Repair when you are clear
and awake.
•
Make sure that your notebook is disconnected
from the electricity supply and all cables are
removed.
•
Remove all loose articles and items of jewellery
before working inside the notebook.
•
Work in a well-lit area on a fl at, clean, stable
surface free of dust and any other small particles
or any debris.
•
Make sure your hands are dry and clean before you begin work.
•
Please be aware that the notebook casing may contain sharp edges. You must exercise caution at all
times.
•
The components inside your notebook are sensitive to electrostatic discharge. You must use the supplied
anti-static wrist strap to earth yourself while you work. Failure to do this could damage components inside
your notebook.
•
Make sure you back-up your data before attempting any repair. If you do not, your data may be lost.
•
Follow these fi tting instructions carefully. If you are in any doubt as to any of the procedures or instructions
please contact us via the Easy Repair line.
Tools Needed
You will need the following tools:
•
Small Philips screwdriver;
•
Anti-static wrist strap;
•
Something to hold the small screws (trays, jars, or
cups). Label each cup with the disassembly step
number. This can reduce questions about where
each screw came from during re-assembly.
2 - Packard Bell Easy Repair
Advertisement
