Suzuki SY413 Service Manual page 4736

1. Gaging plastic
2. Scale
62G00-6A3-69-1S
62G00-6A3-69-2S
5) Remove cap and using a scale on gaging plastic envelope, mea-
sure gaging plastic width at the widest point (clearance).
If clearance exceeds its limit, use a new standard size bearing and
remeasure clearance.
Item
Bearing
clearance
62G00-6A3-197S
6) If clearance can not be brought to within its limit even by using a
new standard size bearing, regrind crank pin to undersize and use
0.25 mm undersize bearing.
Item
Bearing
clearance
ENGINE MECHANICAL 6A3-69
Standard
0.045 – 0.063 mm
(0.0018 – 0.0025 in.)
Standard
0.038 – 0.083 mm
(0.0015 – 0.0033 in.)
Limit
0.08 mm
(0.0031 in.)
Limit
0.091 mm
(0.0036 in.)