Suzuki SY413 Service Manual page 4697

6A3-30 ENGINE MECHANICAL
62G00-6A3-30-1S
2
3
62G00-6A3-30-3S
(b)
2
62G00-6A3-30-5S
INSTALLATION
CAUTION:
When raising engine, be careful not to raise it excessively
and not to cause transmission to contact body, steering
gear box, etc.
Reverse removal sequence to install timing chain cover noting follow-
ing points.
1) Apply sealant "A" to area as shown in figure.
"A": Sealant 99000-31150
62G00-6A3-82S
1. Timing chain cover
2. Cylinder head
3. Cylinder block
2) Apply engine oil to oil seal lip, then install timing chain cover.
1
Tighten bolts and nut to specified torque.
NOTE:
Before installing timing chain cover, check that pin is securely
fitted.
62G00-6A3-83S
Tightening Torque
1. Timing chain cover
(a): 11.0 N·m (1.1 kg-m, 8.0 lb-ft)
2. Nut
3. Bolt
3) Install generator belt idler pulley.
Tighten nut to specified torque.
Tightening Torque
(a): 45 N·m (4.5 kg-m, 33.0 lb-ft)
4) Install generator belt tensioner.
1
(a)
3
Tighten bolts to specified torque.
Tightening Torque
(b): 25 N·m (2.5 kg-m, 18.5 lb-ft)
5) Install water pump pulley.
62G00-6A3-79S
1. Generator belt
idler pulley
2. Generator belt
tensioner
3. Water pump pulley