Zero-Turn Rider Controls - Simplicity Cobalt Series Operator's Manual

Zero-Turn Rider Controls

5
Callout
A Deck Lift Pedal
B Cutting Height Adjustment Pin
C Deck Lift Lock Lever
D Parking Brake
E Seat Adjustment Lever
F Roll Bar
G Ground Speed Control Levers
H Fuel Selector Valve
I Fuel Tank Cap (One per fuel tank)
J Fuel Level Gauge (One per fuel tank)
K Retractable Seat Belt
L Removable Floor Plate
M Transmission Oil Fill / Tanks (One per transmission)
N Transmission Release Levers (One per transmission)
O Seat Latch
Deck Lift Pedal, Cutting Height Adjustment Pin & Deck
Lift Lock Lever: The deck lift pedal (A, Figure 6), the cutting
height adjustment pin (B), and the deck lift lock lever (C) are
used together to control the cutting height of the mower deck.
See Cutting Height Adjustment for instructions on using these
controls.
Control Name
6
Parking Brake: Pull the parking brake lever up and
back to engage the parking brake. Move the lever fully
forward and down to disengage the parking brake.
Note: To start the unit the parking brake must be engaged.
Engaging the parking brake locks the ground speed control
levers in the NEUTRAL position. The parking brake must be
disengaged before moving the ground speed control levers
out of the NEUTRAL position.
Disengage
Engage
Seat Adjustment Lever: The seat can be adjusted forward
and back. Move the lever towards the left, position the seat as
desired, and release the lever to lock the seat in position.
Suspension Seat: Some models are equipped with a
suspension seat. This seat has several additional options.
See Figure 7 and the chart below for the location of the seats
features and brief description of their function.
Cutting Height Adjustment Pin
Deck Lift Lock Lever
Releases the parking brake.
Locks the parking brake.
13