Warranty; Warranty Statement - Simplicity Cobalt Series Operator's Manual

Hide thumbs Also See for Cobalt Series:
Table of Contents

Advertisement

TRANSMISSIONS
Make
Model
Type
Hydraulic Fluid
Speeds
DIMENSIONS 
Overall Length 
Overall Width (with discharge
chute up)
Overall Width (with discharge
chute down)
Height 
Weight (approximate): 

Warranty

If your unit is equipped with a dual function hour meter that
displays both engine hours and PTO hours, the warranty is
based on the engine hours as displayed by the hour meter.

Warranty Statement

BRIGGS & STRATTON WARRANTY POLICY
LIMITED WARRANTY
Briggs & Stratton warrants that, during the warranty period
specified below, it will repair or replace, free of charge, any
part that is defective in material or workmanship or both.
Transportation charges on product submitted for repair or
replacement under this warranty must be borne by purchaser.
This warranty is effective for and is subject to the time periods
and conditions stated below. For warranty service, find the
nearest Authorized Service Dealer in our dealer locator
map at simplicitymfg.com .The purchaser must contact
the Authorized Service Dealer, and then make the product
available to the Authorized Service Dealer for inspection and
testing.
There is no other express warranty. Implied warranties,
including those of merchantability and fitness for
a particular purpose, are limited to one year from
purchase, or to the extent permitted by law. All other
implied warranties are excluded. Liability for incidental
or consequential damages are excluded to the extent
exclusion is permitted by law. Some states or countries do
not allow limitations on how long an implied warranty lasts,
and some states or countries do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation and exclusion may not apply to you. This
warranty gives you specific legal rights and you may also
have other rights which vary from state to state or country to
country.**
WARRANTY PERIOD
Covered Parts
Standard Warranty
Period
Hydro-Gear®
1710-1057L (LH)
1710-1057R (RH)
ZT-4400 Transaxles
SAE 20W-50 motor oil
Forward: 0-10 MPH (0-16.09 km/h)
Reverse: 0-5 MPH (0-8.05 km/h)
82.5" (210 cm) 
61-1/2" (156 cm)  
78" (198 cm) 
72" (182 cm) 
1295 lbs (587 kg) 
Rental Warranty
Period
Riding mowers
4 years (48 months) or
500 hours, which occurs
first.
(+Except as noted
below)
+Belts, Tires, Brake
90 days
Pads, Hoses, Battery,
Blades
+Engine*
See Engine Operator's
Manual
* Emissions-related components are covered by the
Emissions Warranty Statement
** In Australia - Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. For
warranty service, find the nearest Authorized Service Dealer
in our dealer locator map at BRIGGSandSTRATTON.COM,
or by calling 1300 274 447, or by emailing or writing to
salesenquires@briggsandstratton.com.au, Briggs & Stratton
Australia Pty Ltd, 1 Moorebank Avenue, NSW, Australia,
2170.
The warranty period begins on the date of purchase by the
first retail end user, and continues for the period of time or
hours stated in the table above.
No warranty registration is necessary to obtain warranty
on Briggs & Stratton products. Save your proof of
purchase receipt. If you do not provide proof of the initial
purchase date at the time warranty service is requested,
the manufacturing date of the product will be used to
determine the warranty period.
ABOUT YOUR WARRANTY
We welcome warranty repair and apologize to you for being
inconvenienced. Warranty service is available only through
Simplicity Authorized Service Dealers. Most warranty
repairs are handled routinely, but sometimes requests for
warranty service may not be appropriate. This warranty
only covers defects in materials or workmanship. It does not
cover damage caused by improper use or abuse, improper
maintenance or repair, normal wear and tear, or stale or
unapproved fuel.
Improper Use and Abuse - The proper, intended use of
this product is described in the Operator's Manual. Using the
product in a way not described in the Operator's Manual or
using the product after it has been damaged will void your
warranty. Warranty is not allowed if the serial number on the
product has been removed or the product has been altered
or modified in any way, or if the product has evidence of
abuse such as impact damage, or water/chemical corrosion
damage.
Improper Maintenance or Repair - This product must be
maintained according to the procedures and schedules
provided in the Operator's Manual, and serviced or repaired
using genuine Briggs & Stratton parts or equivalent. Damage
90 days
90 days
See Engine Operator's
Manual
45

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cobalt Series and is the answer not in the manual?

Questions and answers

Tony Frisch
April 25, 2025

How to adjust striping roller

Tony Frisch
April 25, 2025

How to adjust stripper height

Kevin
May 8, 2025

Hi. Where are the hydraulic purge values located on a cobalt 61in 27hp zero turn

Subscribe to Our Youtube Channel

This manual is also suitable for:

59015975901748

Table of Contents