Seat Adjustment; Seat Adjustment (Suspension Seat); Ground Speed Control Lever Adjustment - Simplicity Cobalt Series Operator's Manual

41
2. Wedge a wooden block (D) between the mower blade
and the mower deck housing to keep the mower blade
from turning and torque the blade mounting bolt to 120 ft.
lbs (163 Nm).

Seat Adjustment

The seat can be adjusted forward and back. Move the lever
(A, Figure 42) towards the left, position the seat as desired,
and then release the lever to lock the seat into position.
42
Seat Adjustment (Suspension Seat)
In addition to the forwards and backwards seat adjustment,
models equipped with a suspension seat can be adjusted for
suspension (ride comfort), lumbar support, and back angle.
32
43
Seat Adjustment Lever (Forwards / Backwards): The
seat can be adjusted forward and back. Move the forwards /
backwards seat adjustment lever (A, Figure 43), position
the seat as desired, and release the lever to lock the seat in
position.
Seat Adjustment Knob (Suspension/Ride Comfort): The
seat adjustment knob (B) adjusts the suspension of the seat
(ride comfort). Turn the adjustment knob until the display
scale has a reading that matches the weight of the operator.
Lumbar Adjustment Lever: Turn the lumbar adjustment
knob until the desired amount of lumbar is achieved.
Back Angle Adjustment Knob: Turn the back angle
adjustment knob until the desired amount of back angle is
achieved.

Ground Speed Control Lever Adjustment

The control levers can be adjusted in three ways. The
alignment of the control levers, the placement of the levers
(how close the ends are to one another) and the height of the
levers can be adjusted.
To Adjust the Handle Alignment
Loosen the mount bolts (A, Figure 44) and pivot the lever(s)
(C) to align with each other.
simplicitymfg.com