Cisco IR1101 Getting Started page 10

Getting Started and Product Document of Compliance for the Cisco IR1101 Industrial Integrated Services Router
Figure 5 USB Port Cover Installation
7. Tighten the latch lock screw to a torque of 2.8 to 3.8 inch-lbs (0.3 to 0.4 newton meter). Refer to
finished USB cover installation.
Figure 6 USB Cover Finished Installation
8. Slide the Pluggable Module into the device as shown in
(2) on the front of the device. Push the Pluggable Module all the way into the device until you feel it seat, and then
torque the latch lock screw 8-10 inch-lbs. (0.9-1.1 newton meter).
Figure 7. The latch lock screw (1) aligns with the screw hole
10
Figure 6 for a