Adding A Date Stamp; Adjusting Image Brightness (Exposure Compensation); Changing The Iso Speed - Canon PowerShot SX70 HS Advanced User's Manual

z

Adding a Date Stamp

Shots taken without adding a date stamp can be printed with one as
z
follows.
However, adding a date stamp this way to images that already have
one may cause it to be printed twice.
- Print using printer functions
- Use camera DPOF print settings to print
z
Adjusting Image Brightness (Exposure
Compensation)
Auto Exposure Bracketing (AEB Shooting)
„
To clear the AEB setting, set the AEB amount to 0, following the
z
configuration procedure.
AEB shooting is available only in
z
using the flash.
If exposure compensation is already in use, the value specified for that
z
function is treated as the standard exposure level for AEB.
z

Changing the ISO Speed

Although choosing a lower ISO speed may reduce image graininess,
z
there may be a greater risk of subject and camera shake in some
shooting conditions.
Choosing a higher ISO speed will increase shutter speed, which
z
may reduce subject and camera shake and enable sufficient flash
illumination for subjects farther away. However, shots may look grainy.
/ / / /
248
/ modes without