Recording A Variety Of Movies (Movie Mode) - Canon PowerShot SX70 HS Advanced User's Manual

Handheld Night Scene
Image noise is reduced by combining consecutive shots into a single
z
image.
Hold the camera steady as it shoots continuously.
z
There will be a delay before you can shoot again, as the camera
z
processes and combines the images.
Shots may look grainy because the ISO speed is increased to suit the
z
shooting conditions.
Excessive motion blur or certain shooting conditions may prevent you
z
from obtaining the desired results.
Try to keep the camera still when using the flash, because the shutter
z
speed may be slower.
Fireworks
Mount the camera on a tripod or take other measures to keep it still and
z
prevent camera shake. Additionally, you should set [IS mode] to [Off]
when using a tripod or other means to secure the camera.
Although no frames are displayed when you press the shutter button
z
halfway, optimal focus is still determined.
z

Recording a Variety of Movies (Movie Mode)

Black bars are displayed on the top and bottom edges of the screen in
z
mode. The black bars indicate image areas not recorded.
In mode, the image display area narrows and subjects are enlarged.
z
Exposure can be adjusted during recording by pressing the
z
and then pressing the
To switch between recording with auto focus and a fixed focus, press
z
the button before or during recording. (Auto focus is indicated by a
green [○] in the upper left of the [
Note that this icon is not displayed when
[Disable].
/ buttons.
] icon.)
239
[Movie Servo AF] is set to
button