Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
z
z
Press the [ ] button several times until
[ ] is displayed.
z
z
The flash will no longer be activated.
z
z
To activate the flash, press the [ ] button
again. ([ ] is displayed.) The flash will
automatically fire in low-light conditions.
•
If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct
•
Date stamps cannot be edited or removed.
Still Images
(=
12).
1
Configure the setting.
z
z
Press the [
] button, choose [Date
Stamp
] on the [
] tab, and then
choose the desired option
(=
21).
z
z
Once the setting is complete, [
displayed.
2
Shoot.
z
z
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
z
z
To restore the original setting, choose
[Off] in step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
] is
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
32