Changing The Is Mode Settings; Using Digital Tele-Converter; Storing The Zoom Or Mf Position - Canon PowerShot SX70 HS Advanced User's Manual

Tracking AF
[AF operation] is set to [
z
Tracking may not be possible when subjects are too small or move
z
too rapidly, or when subject color or brightness matches that of the
background too closely.
[ ] is not available.
z
To set to [
z
Moving the AF Point
„
You can also return the AF point to the original position in the center by
z
holding down the
z

Changing the IS Mode Settings

The [IS mode] setting changes to [On] for movie recording, even if
z
[Shoot only] is set.
If image stabilization cannot prevent camera shake, mount the camera
z
on a tripod or take other measures to hold it still. Additionally, you
should set [IS mode] to [Off] when using a tripod or other means to
secure the camera.
z

Using Digital Tele-Converter

The shutter speed at maximum telephoto (when you move the zoom
z
lever or zoom button all the way toward
zooming in to enlarge subjects with digital zoom.
z

Storing the Zoom or MF Position

By choosing
z
before manually focusing, you can retain the manual focus status for
the next time you turn on the camera.
In / mode, the camera returns to the zoom position where
z
settings were registered.
] and cannot be changed.
], press the button and choose [
button.
[Recall zoom/MF settings] → [MF memory] → [On]
) may match the speed when
251
].