Adding A Date Stamp; Continuous Shooting - Canon PowerShot SX400 IS User Manual

Adding a Date Stamp

The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct ( = 17).
● Date stamps cannot be edited or removed.
Downloaded From camera-usermanual.com Canon Manuals
Still Images Movies
1
Configure the setting.
● Press the [ ] button, choose [Date
Stamp ] on the [ ] tab, and then
choose the desired option ( = 25).
● Once the setting is complete, [ ] is
displayed.
2
Shoot.
● As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
● To restore the original setting, choose
[Off] in step 1.
● Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
- Print using printer functions ( = 92)
Use camera DPOF print settings ( = 95) to print
-
- Use the software downloaded from the Canon website
( = 89) to print

Continuous Shooting

Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see "Continuous Shooting
Speed" ( = 116).
1
Configure the setting.
● Press the [ ] button, choose [
menu, and then choose [
● Once the setting is complete, [
displayed.
2
Shoot.
● Hold the shutter button all the way down
to shoot continuously.
Before Use
Basic Guide
Advanced Guide
1
2
3
4
Still Images Movies
5
6
7
] in the
] ( = 24).
8
] is
Index
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
35