Front drive axle, servicing
- Place seal - 3 - from repair kit in groove - 4 - of triple roller
joint.
1 - Circlip
2 - Cover from repair kit
3 - O-ring
4 - Triple roller joint housing
- Insert axle shaft in press.
- Press cover - 1 - into triple roller joint until circlip can be
installed.
- Insert circlip, make sure seated correctly.
The circlip must be audibly engaged when it seats!
- Install joint protective boot.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 50 de 61
12/2/2005