Volkswagen Golf 1999 Service Manual page 2004

Front suspension, servicing
- Install thrust piece - 4 - with wide collar toward wheel
bearing housing and special nut - 5 - on inside.
- Press wheel bearing in by operating pump.
- Insert circlip with needle nose pliers.
1 - Wheel bearing
2 - Thrust tube E-13-1
3 - Piston cylinder HKZ-15
4 - Thrust tube E-10
5 - Special nut E-8-214 and pull rod
Pressing in wheel hub
- Install hub - 1 - and piston cylinder - 2 - with pull rod on
wheel bearing.
- Install thrust piece - 3 - with collar toward special nut - 4 -
on inside.
- Press in hub by operating pump.
1 - Wheel hub
2 - Piston cylinder HKZ-15
3 - Thrust tube E-5
4 - Special nut E-8-214 and pull rod
Further installation is in reverse sequence to removal.
III - Front suspension strut, assembly
overview
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 41 de 51
12/2/2005