Tap Water Connection; Ventilation Recovery; Free Cooling - Nibe Fighter 1210 Installation And Maintenance Instructions Manual

Tap water connection

The heat pump should be supplemented with an elec-
tric water heater if a bubble pool or other significant
consumer of hot water is installed.
VV
COMPACT
Pipe connections
Cirk.pump
Värmepump
Varmvatten
Tillsatsvärme
Larm
Kontrollera 1
att vatten
finns i pan-
nan innan 0
den in-
kopplas. R
FIGHTER 1210
FIGHTER 1210

Ventilation recovery

The installation can be supplemented with the exhaust
air module FLM 30 to provide ventilation recovery.
To avoid condensation, all pipes and other cold sur-
faces must be isolated with diffusion-proof material.
Extract air
Ø 160
Brine in
Brine out

Free cooling

The equipment can be supplemented with a fan coil
unit to make the connection of ambient cold possible.
To avoid condensation, all pipes and other cold sur-
faces must be isolated with diffusion-proof material.
Where the cooling demand is high, fan convectors
with drip trays and drain connection are needed.
P
Rock-/soil collector
For the Installer
15
Exhaust air
Ø 160
FLM 30
Cirk.pump
Värmepump
Varmvatten
Tillsatsvärme
Larm
Kontrollera 1
att vatten
nan innan finns i pan- 0
den in-
kopplas. R
FIGHTER 1210
Fan convector
EXP
Brine In Inlet to heat pump
Brine Out
Outlet from heat pump