PeakTech 1070 Operation Manual page 34

4.2. AC voltage measurement (AC V)
1. Connect red test lead to "V//mA" jack, black test lead
to "COM" jack.
2. Set the FUNCTION switch to the desired AC V position.
3. Connect the test leads across the source or load under
measurement.
4.3. DC current measurement (DC A)
1. Connect red test lead to "V//mA" jack when the current
is less than 200 mA and to "10 A" jack when the current
is larger than 200 mA. Connect the black test lead to
"COM" jack.
2. Set the function switch to the desired DC A position.
3. Connect the test leads across the source or load under
measurement.
-33-