Safety Precautions - PeakTech 1070 Operation Manual

1. Safety Precautions

This product complies with the requirements of the
following European Community Directives: 2004/108/EC
(Electromagnetic Compatibility) and 2006/95/EC (Low
Voltage) as amended by 2004/22EC (CE-Marking).
Overvoltage category II 250V; TÜV/GS ; pollution degree 2.
CAT I: For signal level, telecommunication, electronic
with small transient over voltage
CAT II: For local level, appliances, main wall outlets,
portable equipment
CAT III: Supplied from a cable under earth; fixed
installed switches, automatic cut-off or main
plugs
CAT IV: Units and installations, which are supplied
overhead lines, which are stand in a risk of
persuade of a lightning, i.e. main-switches on
current input, overvoltage-diverter, current use
counter.
To ensure safe operation of the equipment and eliminate
the danger of serious injury due to short-circuits (arcing),
the following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
-22-