YARWAY SERIES 460D3 AND 515D3 INTEGRAL STRAINER HIGH PRESSURE DISC TRAPS
INSTRUCTION, OPERATION AND MAINTENANCE MANUAL
Before installation these instructions must be fully read and understood
DESIGN PRESSURE/TEMPERATURE RATINGS
SERIES 515D3
SERIES 460D3
RATING
Disc traps operate from 150 psig to 1500 psig.
Operation at lower pressures may result in
reduced air handling properties, and low cycle
rates.
The maximum allowable back pressure outlet
is 80% of pressure at trap inlet, based on
absolute pressures.
SHELL PRESSURE/TEMPERATURE RATINGS
460D3
Trap operating conditions
515D3
Emerson.com/FinalControl
MAX. TEMPERATURE (C)
SATURATION
CURVE
ALL
LIQUID
PHASE
ALL
SUPERHEAT
MAX. TEMPERATURE (F)
SERIES NUMBERS
To determine the size, series number, and
operating conditions rating, refer to the
nameplate on the trap body.
Suffix letter identification
SW
Socket weld ends
FL
Flanged ends (special option)
D3
Disc trap
900
150
Maximum operating pressure (psig)
1500
150
© 2017 Emerson. All rights reserved.
900
Maximum operating temp. (°F)
900
SERIES 460D3
SERIES 515D3
VCIOM-09544-EN 19/05