Changing The Sound And Display Settings - Sony XR-C8220 Operating Instructions Manual

Fm/am cassette car stereo
Hide thumbs Also See for XR-C8220:
Table of Contents

Advertisement

Available languages

Available languages

Changing the sound and
display settings
The following items can be set:
•Clock (page 7)
•D.Info (Dual Information)* – to display the
clock and the play mode simultaneously (on),
or to display the information alternately (off).
•Amber/Green – to change the illumination
colour to amber or green.
•Dimmer – to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the interior lights on.
— Select "on" to dim the display.
— Select "off" to deactivate Dimmer.
•Contrast – to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
1
•Voice guide*
function for vocalized
comments.
— Select "Voice 1" to minimize the volume
of the guide.
— Select "Voice 2" to choose a louder
volume than "Voice 1".
— Select "Voice 3" to maximize the volume
of the guide.
— Select "Voice off" to deactivate the Voice
guide.
•Beep – to turn the beep sounds on or off.
•RM (Rotary Commander) – to change the
operative direction of the controls of the
rotary commander.
— Select "norm" to use the rotary
commander in the factory-set position.
— Select "rev" when you mount the rotary
commander on the right hand side of the
steering column.
•L.out(Line Output)*
•Loud (Loudness)*
even at low volumes. The bass and treble will
be reinforced.
•LPF (Low Pass Filter)*
•M.dspl (Motion Display) – to turn the motion
display to 1, 2, or off.
•English/Spanish*
comments of the voice guide to English or
Spanish.
•A.Scrl (Auto Scroll)*
1
Press (SHIFT).
2
Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
Clock n D.Info*
1
n Contrast n Voice*
L.out*
2
n Loud*
1
English/Spanish*
16
2
(page 17).
1
– to enjoy bass and treble
1
1
– to change the vocalized
1
(page 18)
n Amber/Green n Dimmer
1
n Beep n RM n
n LPF*
1
n M. dspl n
1
n A.Scrl*
1
1
When the radio is off, or when no tape, CD,
*
MD is playing, this item will not appear.
2
When the optional equalizer preamplifier is
*
not connected, this item will not appear.
3
Press (5) (n) to select the desired
setting (Example: on or off).
For the "Contrast" setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.

Advertisement

Chapters

Table of Contents
loading

Table of Contents