Playing A Tape In Various Modes - Sony XR-C8220 Operating Instructions Manual

Fm/am cassette car stereo
Hide thumbs Also See for XR-C8220:
Table of Contents

Advertisement

Available languages

Available languages

Fast-winding the tape
During playback, push the SEEK/AMS
control up or down and hold.
Fast-forward
Rewind
To start playback during fast-forwarding or
rewinding, press (MODE) (*).
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down and release, for each
track you want to skip.
You can skip up to nine tracks at one time.
To locate
succeeding tracks
To locate
preceding tracks
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds.
— there is noise between tracks.
— there are long sections of low volume or quiet
interludes.
Changing the display item
Each time you press (DSPL), the item changes
as follows:
z Tape playback
Frequency* Z
* While the ATA function is activated.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds. In the
Motion Display mode, all the above items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 16.)
Playing a tape in various
modes
You can play the tape in various modes:
• NR (Dolby NR) lets you select the Dolby* NR
B system.
• B Skip (Blank Skip) skips blanks longer than
eight seconds.
• ATA (Automatic Tuner Activation) turns on
the tuner automatically when fast-winding
the tape.
• Repeat (Repeat Play) repeats the current
track.
* Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D
symbol a are trademarks of Dolby
Laboratories Licensing Corporation.
1
During playback, press (SHIFT).
SHIFT
2
Press (4) (PLAY MODE) repeatedly until
the desired play mode appears.
Each time you press (4) (PLAY MODE),
the item changes as follows:
NR n B. Skip n ATA
z Clock
3
Press (5) (n) to select "on."
The selected play mode starts.
4
Press (SHIFT).
To return to normal playback mode, select
"off" in step 3 above.
DSPL
SET UP PLAY MODE
1
2
3
4
5
RLAY MODE
REP
6
7
8
9
1
9

Advertisement

Chapters

Table of Contents
loading

Table of Contents