Labelling A Cd; Disc Memo - Sony XR-C8220 Operating Instructions Manual

Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
RLAY MODE
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P" above.
2
Press (2) (N) or (5) (n) to select the
track you want to erase.
DISC TRACK
RLAY MODE
The track currently registered in slot 6.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DISC TRACK
RLAY MODE
µ
DISC TRACK
SET UP RLAY MODE
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT).
22
ENTER
Track slot number
ENTER
ENTER
ENTER

Labelling a CD

(For a CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name and select specific tracks for
playback (page 24).
1
During CD playback, press (LIST) for two
seconds.
DISC
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
DISC
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (5) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
DISC
If you press (2) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (LIST) for two seconds.
Tip
To erase or correct a name enter "_" (under-bar)
for each character.

— Disc Memo