Setting The Clock - Sony XR-C8220 Operating Instructions Manual

Caution alarm
If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch on the
bottom of the unit is set to the A position).
If you connect an optional power amplifier and
do not use built-in amplifier, the beep sound
will be deactivated.

Setting the clock

The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (SHIFT), then press (3) (SET UP)
repeatedly until "Clock" appears.
SET UP
1 Press (5) (n).
SET UP
The hour indication flashes.
2 Set the hour.
to go backward
to go forward
3 Press (5) (n).
SET UP
The minute indication flashes.
4 Set the minute.
to go backward
to go forward
SET UP
continue to next page n
7