SHINOLA 5021.D Operation Manual & Warranty Book page 32

AUTOMATIC MODEL SW200-1
If your timepiece features a screw-down crown, you must first unscrew the crown
before you adjust any settings. Refer to page 5 for crown functionality.
WINDING WHILE STOPPED
The maximum power reserve can be restored by
turning the crown clockwise around 30 times.
SETTING THE DATE (QUICK MODE)
For screw-down crown, unscrew the crown to release
it into first position.
Pull out the crown to position II (watch still running) .
Turn the crown clockwise until the required
date appears.
Push the crown back into position I.
If setting the date between 9:00 p.m. and 3:00 a.m.,
follow steps 1 through 3, but be sure to set the date
to the following day.
Remember to reseal the crown if it is a screw down.
To do so, press it against the case until the threads
engage. Then turn it clockwise until tight.
32