Pull Out The Crown To Position Ii - SHINOLA 5021.D Operation Manual & Warranty Book

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION
Example
One or several chronograph hands are not in
their correct zero positions and have to be
adjusted (e.g. following a battery change).

Pull out the crown to position II.

(All chronograph hands are in their correct
or incorrect zero position).
Keep push-buttons
simultaneously for at least 2 seconds then release
(the second counter hand rotates by 360º
—corrective mode is activated).
Adjusting the second counter hand:
Single step — press
Continuous — press
Adjusting the next hand — press
Adjusting the 1⁄10 second counter
hand (position 6h):
Single step — press
Continuous — press
Adjusting the next hand — press
Adjusting the minute counter (position 9h):
Single step — press
Continuous — press
Returning the crown to position I.
(Termination of the chronograph hands
adjustment (can be carried out at any time).
and depressed
A B
A 1x short
A long
B
1x short
A
A long
B
1x short
A
A long
31
A
B