Turn The Crown Until You Reach The Correct Time; Push The Crown Back Into Position I; Setting The Date - SHINOLA 5021.D Operation Manual & Warranty Book

CHRONOGRAPH MODEL 5040.F
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
(= normal position).
- the three chronograph hands are
precisely at zero position following
activation of push-button B. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero .)
SETTING THE TIME
Pull out the crown to position II. (The watch stops.)

Turn the crown until you reach the correct time.

Push the crown back into position I.

NOTE: In order to set the time to the exact second, 1 must
be pulled out when the second hand is in position «60».
Once the hour and minute hands have been set, 3 must be
pushed back into position I at the exact second.
SETTING THE DATE (QUICK MODE)
Press the corrector
date 1 day forward.
NOTE: If setting the date between 9:00 p.m. and
12:20 a.m., be sure to set the date to the following day.
I
once to adjust the
C
28
Minute Hand
Second hand
Month
Day of week
Hour Hand
Date
Second Counter
Minute Counter
1 / Second counter
10
(hour counter after 30 min)
C