SHINOLA 5021.D Operation Manual & Warranty Book page 19

CHRONOGRAPH MODEL 5050.B
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
(= normal position).
- the four chronograph hands are
precisely at zero position following
activation of push-button B. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero .)
SETTING THE TIME
Pull out the crown to position III.
1
(The watch stops.)
2 Turn the crown until you reach the
correct time.
Push the crown back to position I.
3
SETTING THE DATE
Pull out the crown to position II.
1
(The watch continues to run.)
2 Turn the crown until the correct date appears.
Push the crown back to position I.
3
If setting the date between 9:00 p.m. and 12:00 a.m., follow steps 1
4
through 3, but be sure to set the date to the following day.
Center stop-second
Minute hand
I
Hour hand
Minute counter
Hour counter
1 /
10
Big date
19
Second counter
A
I
B
Second hand
1
I II III
2
3
1
II
2
3