On-Line" Measurements; Off-Line" Measurements - Intab PC-Logger 3100i How To Use Manual

1.2 "On-line" measurements

On-line measurements are performed with the "3100i" connected to the
computer's RS-232 port. Measurements can in this mode be monitored in real-
time on the computer's display. Incoming data are continuously transferred to
disk.

1.3 "Off-line" measurements

Off-line recordings are only possible with units that are equipped with
"Display and 64k data memory" and optionally, "expansion memory".
Off-line measurements should be preceded by the transferral of measurement
parameters from the computer to the "3100i".
These parameters contain, among others (see program manual), information
about time and date, measurement interval and which channels are to be
active.
These parameters are effective until a new set is downloaded. The "3100i"
can, after downloading of the parameters, be disconnected from the computer
and started with the help of the keys next to the LCD (see 2.).
After all measurements are completed the "3100i" is again connected to a
computer for transferral of collected data.
6
INTAB Interface-Teknik AB