Enclosure Specifications; Instructions For Use; Preventative Maintenance & Inspection - ProFire PF3100 Series Product Manual

6. Enclosure Specifications

The Thermocouple Card is mounted in the TLX enclosure.
Body Type
Hazloc Rating
Mounting
Operating Temperature
Storage Temperature
Probe
Measurement Temperature Range
Optional: Temperature Probe Operating Range
Optional: Temperature Probe Union Operating Range

7. Instructions for Use

The Thermocouple card is designed to be used with a certified BMS controller as part of the PF3100 platform.
Operation
Operating controls and their uses are described under the Terminal Descriptions section.
8. Preventative Maintenance & Inspection
In order to ensure that the Thermocouple card works correctly and efficiently, the following maintenance and
inspection procedures should be followed:
➢ Ensure that all wires are connected correctly.
➢ Check for corrosion and ensure that no wires are frayed or worn, and all insulation is intact.
➢ Confirm no moisture or condensation is apparent on the board or in the enclosure.
➢ Ensure that the board does not show any sign of mechanical damage (e.g. – damage from an impact such as
dropping an item).
➢ Ensure that the board does not show any sign of electrical damage (components should not be burnt or
damaged in any way).
➢ Confirm that the temperature of the board is within ambient temperature operating limits.
➢ Check that the enclosure is secured and that the device is not subject to excessive vibration.
➢ Routine inspections of all equipment should be performed. If any abnormality is found, corrective actions should
be taken. If the abnormality cannot be corrected, contact PROFIRE.
➢ A qualified technician should perform any tests necessary to confirm that the equipment is still in a safe
condition.
•
Ensure power LED is lit (blue)
•
Ensure link LED is lit (green)
PROFIRE
1.855.776.3473
solutions@profireenergy.com
Specifications
PF3100 Thermocouple Card Product Manual
TLX Enclosure
Standard 1/2" NPT Head Connection
Class I, Div 1, Grp BCD, T4
1/2" NPT Thermowell
-40°C (-40°F) to 60°C (140°F)
-40°C (-40°F) to 60°C (140°F)
11.5" Probe Dual Element Type K Thermocouple, pre-
wired to TC1A and TC1B inputs
-200°C (392°F) to +1350°C (2462°F)
0°C (32°F) to +925°C (1697°F)
-40°C (-40°F) to +250°C (482°F)
Page 9 of 11