Terminal Descriptions
All Thermocouple Terminals
All thermocouples must be Type K "ungrounded." All thermocouple negative terminals connect to red Type K
wire, and all thermocouple positive terminals connect to yellow Type K wire.
Single element thermocouples are NOT considered safety rated and should only be used for monitoring non-
safety critical processes.
Dual element thermocouples ARE considered safety rated when configured in software as such, and when wired
correctly. These inputs may be used for monitoring safety critical processes.
PROFIRE
1.855.776.3473
solutions@profireenergy.com
PF3100 Thermocouple Card Product Manual
Page 6 of 11