Roundshot VR Drive Instruction Manual page 79

4.4 USB settings (continued)
Liveview
permanent
off
permanent
Setting Liveview to "on" for a program has the benefit that a visual check of images on the
camera screen is possible.
Setting Liveview to "permanent" means that the mirror will be locked up from the start to the
very end of the program, allowing a significant reduction in vibration. This is particularly
practical and important for gigapixel projects with large cameras and bulky lenses with long
focals.
Recommended settings
As the camera firmware needs to process all USB commands, this may result in delays and will
require longer pauses (after image).
We therefore recommend to use only those USB features that are essential, for example:
USB cable release with
connected USB cable
on
on
For USB release to work reliably, certain cameras require the release control to be set to "on".
These cameras currently include the Canon EOS 80D + Canon EOS 1Dx mk ii.
release control
on
As there is a great variety of USB features and the firmware of every camera model
reacts differently to USB commands, we recommend that you carefully test these
USB settings for your specific application.
Roundshot VR Drive Instruction Manual – Firmware Version 2.023
For selected USB-compatible cameras it is possible to
Liveview
control the Liveview via USB.
on
These cameras currently include:
• all USB-compatible Canon EOS cameras
• Nikon D5200, D5300, D5500, D5600, D7000,
Set Liveview to "on" or "permanent".
White balance
write ID into
use camera
image
settings
on
D7100, D7200, D7500, D4, D5, D810, D810a, D850
Liveview
permanent
23/05/2019 78