Usb Settings - Roundshot VR Drive Instruction Manual

4.4

USB settings

By default, the images are released automatically by the VR Drive using the camera release cable.
This is the most stable and reliable way to release the images. For the cameras compatible with
HDR mode it is possible to use the USB cable for image release and for other useful features.
USB settings
USB settings
USB cable release with
connected USB cable
on on
check
White balance
white balance
use camera
off
settings
memory check
release control
without check
on
check manual write ID into
mode image
off on
release with release with
USB cable USB cable
off on
check check
white balance white balance
off on
White balance
use camera
settings
The release with the USB cable is not guaranteed under all circumstances. The camera
software and communication with the VR Drive, CF card and other factors have an
influence on the speed of USB image release.
Roundshot VR Drive Instruction Manual – Firmware Version 2.023
Click on "USB settings" to access the USB settings menu of the VR
Drive.
USB settings
wait camera Liveview
off off
Set the "Release with USB cable" to "on" to allow the VR Drive to
release the camera through the USB cable only.
Set the "check white balance" to "on" to test the white balance on
the camera when starting a program. The VR Drive displays a
warning if the "automatic white balance" is active on the camera.
This avoids color mismatch between images.
Choose from any white balance option in the list to set the white
balance on the camera.
Click on "USB cable connected" to turn
on the USB functionalities:
• Release with USB cable
• Check white balance
• White balance
• Wait camera
• Memory check
• Release control
• Check manual mode
• Write identification
Some features might not be compatible
with all cameras!
23/05/2019 76