Table of Contents
Advertisement
Janfire
pelletswärme
heating with log:
1. Fill the boiler with log. Start with big log (diameter 8 -
10cm), make sure that there are some small pieces at
the top of the filling. Put some very dry shavings on top.
2. Light the shavings on top. We suggest to use a BBQ
charcoal lighter.
heating with brown coal:
1. Maximal 10 briquette (about 10 kg) of brown coal are
allowed to put into the boiler at once.
2. Generate a 5 cm thick bed of glow. Than put the briquette
on top of the glow. There should be a distance from about
5 cm between the briquettes.
3. The front grill has to be covered by the delivered cover
sheet.
start up:
During start up the lever of the start-up flap (12) has to be pulled out to the end. You can find the
lever on the right side of the boiler.
Not opening the start-up flap during start-up might cause damage of the
catalytic converter.
Ten minutes after you ignite the fire the start-up flap has to be closed. Make sure that a strong fire is
burning. Than push in the lever as much as possible to close the flap.
Janfire 06.2011
open
Advertisement
Table of Contents
