P30
1
Introduction
This programmers guide provides the information required to develop an ap-
plication for sending UDP commands to P30 charging station. UDP com-
mands can be used to get status information from the charging station or to
control the charging station with a UDP client (PC software or smartphone
app).
Using UDP, the charging station can be integrated into a smart home, which
allows for example, the current power consumption to be regulated in re-
sponse to a photovoltaic system.
Fig. 1-1: Schematic overview (example)
1.1
Safety instructions
This document is an extension to the supplied manuals of P30.
You must comply with all instructions and safety instructions in the
supplied manuals!
UDP Programmers Guide V2.01
© KEBA
Introduction
7