Distance mode /
In Distance mode, you can see how many miles you walk in the course of the
day. The distance calculation is based on your counted steps and the data you
entered into your user proﬁle in the SilverCrest SmartActive app. At midnight,
the distance counter is set back to zero. If the tracker is in sleeping mode, it will
not record any distance that you cover.
Activity time mode /
In Activity time mode, you can see how long you were active during the course
of the day. The time is measured in hours and minutes. At midnight, the activity
time is set back to zero.
Target monitoring mode /
In Target monitoring mode, you can see how close you are to your target as a
percentage. The smiley changes as you get closer to your target. If you exceed
your goal, this is shown. The display goes up to a max. of 999%. You can use
the SilverCrest Smart Active app either to activate both views
just one of the two.
Vibration alarm mode /
By default, the Vibration alarm mode is disabled. You can use the SilverCrest
SmartActive app to set and name up to 5 alarms. You can also set when the
alarm should repeat. Before a set alarm goes oﬀ, you can deactivate the alarm
only via the SilverCrest SmartActive app. When a set alarm goes oﬀ, the tracker
vibrates and the name of the alarm appears on the display
. Press the menu
to turn oﬀ the alarm. Otherwise the alarm will turn oﬀ by itself after a
Inactivity reminder mode /
In Inactivity reminder mode you can set an inactivity alarm via the SilverCrest
Smart Active app. The inactivity duration speciﬁes the maximum period of inac-
tivity after which the inactivity alarm on your tracker will be triggered. You can
set a start and end time during which the Inactivity reminder mode is active.
If the inactivity alarm is triggered, the tracker vibrates and the display
nates between / . Press the menu button
to turn oﬀ the alarm. Otherwise
the alarm will turn itself oﬀ after a few seconds.
│ US - EN
SADP 4 A1