Oki MICROLINE MX Series Quick Setup Manual page 29

Cabinet Model
Figure 21. Feeding the Paper Through the Paper Slot
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Load The Paper (Standard Configuration)
Paper Slot
Metal Paper Guide
(MX1200 or
MX1200+ only)
Pedestal Model
a. Place the paper supply on the floor in front of the printer, or
on the optional paper shelf, if attached.
b. Ensure that the paper pulls freely from the box.
NOTE: Be sure the paper feeds between the two wire guides.
2. Hold the paper in place with one hand (to prevent it from
slipping down through the paper slot) while pulling it through
from above with your other hand.
3. Pull the paper above and behind the ribbon mask, which is a
silver metal strip.
Wire
Guide (2)
Paper
Slot
Pedestal Model
29