Oki MICROLINE MX Series Quick Setup Manual page 27

Ribbon Spool
Left Hub
Ribbon Loading
Instructions
(for future reference)
Figure 19. Threading the Ribbon Around the Ribbon Guide
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
6. Thread the ribbon around the ribbon guide and along the ribbon
path. Be sure to thread the ribbon between the hammer bank
cover and the ribbon mask.
7. Place the empty spool on the left hub.
8. Press the spool down until it snaps into place.
9. Turn the left spool by hand to make sure the ribbon tracks
correctly in the ribbon path and around the ribbon guides.
Load The Ribbon
A
Hammer
Bank Cover
Ribbon Mask
Ribbon Guide
(both sides)
A
27