Sony 4-183-746-11(1) Operating Instructions Manual page 67

Camera Setting:
Set the camera to wireless flash.
For details, refer to the operating instructions supplied with your camera.
Controller Setting:
1
Press the MODE button repeatedly to display
[ WL].
2
Press the Fn button.
3
Press the g or G button to make [CTRL] blink.
4
Press the Fn button.
5
Press the g or G button to make RATIO [ON] blink.
6
Press the Fn button.
7
Press the f or F button to select the lighting ratio.
• The lighting ratio may be set to the following.
1, 2, 4, 8, 16, --*
* The flash unit cannot flash when the lighting ratio is set to [--].
8
Press the g or G button to select the lighting ratio
of the controller and off-camera flash units (RMT,
RMT2).
• Set the power level ratio to [--] on the flash unit when there is an off-
camera flash (RMT/RMT2) you don't want to fire when you use the
flash unit with the controller after setting the flash unit to [CTRL1].
9
Press the Fn button.
10
Press the TTL/M button to display
• When
lighting ratio control.
is selected, manual setting flash is used with the
.
67