Sony 4-183-746-11(1) Operating Instructions Manual page 63

Setting wireless flash by flash only
Once you have performed the wireless flash setup in step [1], if you continue to use
the same camera and flash combination without changing the wireless channel then
you can also set the flash and camera separately to wireless.
Camera setting:
Set the camera to the wireless flash mode.
For details, refer to the operating instructions supplied with your camera.
Flash setting:
1
Press the TTL/M button to display
• When selecting
set.
2
Press the MODE button repeatedly to display [ WL].
3
Press the Fn button.
4
Press the g or G button to make [RMT] or [RMT2] blink.
5
Press the Fn button.
• Make sure that the wireless channel of the off-camera flash is set to the
same channel as the controller. For details on setting the wireless channel,
see "Custom setting" (page
, the flash unit fires with the power level to be
).
74
or .
63