Startup Sequence - Samsung SLS-BU10G User Manual

Startup Sequence

The following steps show the detailed Network Extender states during the startup
sequence.
1
The Network Extender is under an autonomous hardware test cycle. It is not
possible to load or run any software, including the user Admin Website Page.
2
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
Copyright © 2019, All Rights Reserved.
Powered-on and hardware initializing
o The Network Extender State: The device has been powered on and the
system is performing hardware tests.
o LED State: Solid red
Hardware test completed and software loaded ("Boot Complete")
Chapter 2 Network Extender Setup
15