Model 295-702F Clean Phone; Model 295-702W Clean Phone; Chemical Resistance; Approvals - GAI-Tronics Clean Phone 295-702W Manual

®
Clean Phone VoIP Telephones

Model 295-702F Clean Phone

Construction:
Front panel .......................................................................... 8 mil polyester over 16-gauge stainless steel
Mounting bracket ................................................................................................16-gauge stainless steel
Dimensions
Front panel ........................................................................... 12.00 H × 12.00 W in; (304.8 × 304.8 mm)
Mounting bracket ...................................... 10.88 H × 10.75 W × 1.75 D in; (276.2 × 273.1 × 44.3 mm)

Model 295-702W Clean Phone

Construction
Front panel .......................................................................... 8 mil polyester over 16-gauge stainless steel
Back enclosure ....................................................................................................16-gauge stainless steel
Dimensions
Front panel ............................................................................ 12.00 H × 12.00 W in (304.8 × 304.8 mm)
Back enclosure ........................................... 12.00 H × 12.00 W × 2.06 D in (304.8 × 304.8 × 52.3 mm)
Shipping weight & dimensions ................................................................. 12.15 lb, 17.00 × 17.00 × 11.00 in

Chemical Resistance

®
The Clean Phone graphic overlay is designed to withstand exposure to many chemicals. Please contact
the factory for questions pertaining to chemicals not listed below:
Ajax/Vim in solution
1
Alkalicarbonate solution
Ammonia (<40%)
Acetic Acid (50%)
1
Ariel powder in solution
1
Bleach
Castor oil
Caustic soda (<40%)
Cutting oil
Cylohexanol
Diacetone alcohol
Diesel
1
Extremely faint glossing of the texture was noted.
®
The Clean Phone graphic overlay is NOT resistant to the following:
Concentrated mineral acids
Concentrated caustic solution
Dimethylformamide

Approvals

Safety of Information Technology Equipment ...................................................................... UL/CSA 60950
Compliance to Standard ................................................................................................. FCC CFR 47 Part 15
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Depending upon the wiring and features used on this device, additional precautions may be necessary
not to cause harmful interference. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-470G.docx
05/19
®
®
1
Downey/Lenor
Ethanol
Glycerin
Glycol
1
Gumption
Hydrochloric acid (<36.7%)
Hydrogen Peroxide (25% solution)
Linseed Oil
Methanol
Nitric Acid (<10%)
Paraffin oil
1
Persil powder in solution
High pressure steam at over 100º C
Benzyl alcohol
Tetrahydrofuran
Pub. 42004-470G
Page 15 of 15
1
Petroleum spirit
Phosphoric acid (<30%)
Potassium ferricyanide
Potassium hydroxide (<30%)
Pure turpentine
1
SBP 60/95
Sulfuric acid (<10%)
Tomato Ketchup
Trichloroacetic acid (<50%)
White spirit
1
Windex
Wisk
Methylene chloride
UV exposure