Menu Tree - Sony HKCU-FP2 Operation Manual

1
Turn the control knob to move the , arrow to the
desired item, then press the control knob.
The , arrow changes to a flashing * asterisk. The input
fields are displayed. A second , arrow is displayed for
the input fields.
2
Turn the control knob to move the , arrow to the
desired input field, then press the control knob.
The , arrow changes to a flashing ? question mark.
3
Turn the control knob to change the setting.
To cancel a changed input field setting
Set the CANCEL/ENTER lever to the CANCEL position
before pressing the control knob. The field is restored to
its current setting. Other changed input fields are not
restored to their previous setting.
To suspend menu changes
Set the DISP/MENU lever to the MENU position to exit the
menu screen.
The DISP/MENU lever can be set to the MENU position
again to restart the operation.
4
Press the control knob.
The ? question mark changes back to the , arrow, and
the input field setting is registered.
5
Repeat steps 2 to 4 to change other input fields.
6
Turn the control knob to move the , arrow to END,
then press the control knob.
The * asterisk changes back to the , arrow, and all item
input field settings are registered.
To cancel all changed item settings
Turn the control knob to move the , arrow to ESC, then
press the control knob.
The * asterisk changes back to the , arrow, and all
changes are discarded.
To enter a character string
Some menu items require a character string input.
Moving the , arrow to an item with a character string input
and pressing the control knob displays a rectangular cursor
and a list of selectable characters.
Turning the control knob moves the cursor between
characters.
The following menu item has character strings:
• CCU CONFIGURATION menu t <BAR CHARACTER>
page t BAR CHARACTER
1
Move the text cursor to the input position, then press
the control knob.
A second cursor is displayed in the character list.
2
Turn the control knob to move the cursor to the
desired character, then press the control knob.
Repeat steps 1 and 2 to enter other characters.
• Select INS to insert a space character at the cursor
position.
• Select DEL to delete the character at the cursor position.
• Select RET to return to step 1 without changing the string.
• Entering the maximum number of characters (up to the
right edge) moves the cursor to ESC on the lower right of
the character list.
3
Turn the control knob to move the cursor to END, then
press the control knob.
The new input string is registered.
To cancel the character string setting
Turn the control knob to move the cursor to ESC, then
press the control knob.
To exit the menu display
In menu display mode, set the DISP/MENU lever to the MENU
position.

Menu Tree

SYSTEM OPERATION menu
OUTPUT SELECT
(S01)
GENLOCK PHASE
(S02)
MULTI FORMAT
(S03)
OUTPUT FORMAT
(S04)
SD ASPECT
(S05)
RETURN SET
(S06)
OUTPUT
PIX
WF
LASER DIODE
REFERENCE
GENLOCK
H STEP
COARSE
SC PHASE
V PHASE
SYNC OUT
FREQUENCY
CAMERA FORMAT
SLOT NO
1-1&2
3&4
COMPONENT
HD-SD DELAY
SD ASPECT
SD LB SEL
H-POSITION
CENTER
V-POSITION
CENTER
H-INTERP
V-INTERP
RET1
RET2
RET3
RET4
Setup Menu
17