Battery Charging - Gtech MULTi K9 Operating Manual

Press the power button with your foot to
turn the AirRam K9 on.

Battery charging

When the state of charge indicator starts to
flash one green LED, recharge the battery.
8
2860_System_TE_K9_manual_update_aw.indd 8
To get the best performance on hard floors
with deep crevices, remove the brush bar
as shown on page 11. Insert the supplied
brush bar hole plug into the side of the head
assembly as shown in the image above.
The battery can be charged whilst it's in the
AirRam K9, or when it's off the product.
To remove the battery, squeeze the latch
underneath and pull upwards.
31/05/2018 11:07