Samsung DCS-816 General Description Manual page 26

Digital communication system
Table of Contents

Advertisement

SAMSUNG
DCS-816
Flexible Ringing
Each C.O. line can be programmed to ring at any station or station group. Each
line can be assigned a day ring destination and a night ring destination.
Hot Line
Stations can be programmed to call a pre–defined station or station group
whenever that station goes off–hook. A hot line delay timer of 1–250 seconds
can be programmed to allow sufficient time to make a different call.
In Group/Out of Group
Individuals assigned to a station hunt group may temporarily remove their
telephones from the group by pressing the In/Out of Group key provided that
there should be someone still in the group. Stations out of a group will not
receive calls to that group but will continue to receive calls to their individual
extension numbers. When desired, the user may put him/herself back into the
group by pressing the key again. Users who do not have this key may dial the
access code and the group desired. A station user is allowed to be in several
groups if a key and the extender of that group are assigned for each group on
the user's phone.
Incoming Call Distribution
Incoming calls can be assigned to ring a distributed station hunt group. This
allows all members of the group to share the call load.
Incoming/Outgoing Service
Outside lines are available for incoming or outgoing service. Programming
allows any outside line to be used for incoming calls only, outgoing calls only or
both–way service.
Individual Line Control
Each station in the system can be individually programmed to allow or deny
dialling out as well as allow or deny answering for each outside line.
ISDN Service
For DCS-816, the DCS Compact 2BRI or 4BRI card can be installed.
Least Cost Routing
Least Cost Routing (LCR) is the ability to automatically select the appropriate
central office route for the outside number dialled by any station. LCR can
become quite complicated to understand and program but does allow highly
complex dialling decisions. The LCR package includes the following features:
• Option to use or not use LCR
• Programmable LCR access code
• Digit analysis table: 300 entries each with 10 digits
2BRI
Provides 2 BRI ports, has four channels.
4BRI
Provides 4 BRI ports, has eight channels.
4 - 10
General Description
March 1999

Advertisement

Table of Contents
loading

Table of Contents